Page Areas:

Current Submenu:

Additional Information:

Where to find us

You will find us: TNF-Tower, Altenberger Str. 69, 4040 Linz ...  more of Where to find us (Titel)

Position Indication:



TGA Q5000
Thermogravimetric Analysis (TGA) measures weight changes in a material as a function of temperature (or time) under a controlled atmosphere. Its principal uses include measurement of a material's thermal stability and composition. Thermogravimetric Analysis instruments are routinely used in all phases of research, quality control and production operations.

DSC Q2000
Differential Scanning Calorimeters (DSC) measures temperatures and heat flows associated with thermal transitions in a material. Common usage includes investigation, selection, comparison and end-use performance evaluation of materials in research, quality control and production applications. Properties measured by TA Instruments’ DSC Differential Scanning Calorimeters techniques include glass transitions, "cold" crystallization, phase changes, melting, crystallization, product stability, cure / cure kinetics, and oxidative stability.

TMA Q400
Thermomechanischer Analysator
The Q400 is a sixth-generation product from the world leader in thermal analysis. Its performance, ease-of-use, and reliability aptly demonstrate our long experience
in designing novel instruments for high sensitivity mechanical measurements over a wide temperature range.

DMA Q800
Dynamic Mechanical Analysis measures the mechanical properties of materials as a function of time, temperature, and frequency. The Q800 DMADynamic Mechanical Analysis instrument incorporates unique technology to provide the ultimate in performance, versatility, and ease-of-use. State-of-the-art non-contact, linear drive motor technology in our Dynamic Mechanical AnalysisDMA instruments provide precise stress control. Ultra sensitive optical encoder Dynamic Mechanical Analysistechnology is used to measure strain and air bearing technology insures virtually friction-free movement. The combination of these technologies sets the Q800 Dynamic Mechanical Analysisapart from competitive instruments that use conventional stepper motors, LVDT strain measurement devices, and mechanical springs. The Q800 Dynamic Mechanical AnalysisDMA instrument operates over a wide temperature range (-150 to 600°C) and provides multiple modes of deformation including dual/single cantilever and 3-point bending, tension, compression, and shear. The clamps are individually calibrated for data accuracy and the elegant but simple design facilitates sample mounting.Dynamic Mechanical Analysis

Viscotek High Temperature GPC (HT-GPC) System
The Viscotek High Temperature GPC (HT-GPC) System is a revolutionary advanced detector system specifically designed for the characterization of polyolefins, natural and synthetic polymers, nanoparticles and other large molecules. Representing a breakthrough in high temperature technology and engineered in a modular format for flexibility, reliability and easy maintenance, the new Viscotek HT-GPC operates from 30 to 175 degrees C and is configured as follows:
Model 350 High Temperature Triple Detector Array (HT-TDA) featuring a Differential Refractive Index (RI) Detector, four-capillary Differential Viscometer Detector and patent-pending Low Angle Light Scattering (LALS) Detector.
Vortex Autopreparation/Autosampler Module for automated sample preparation and delivery.
Model 1122 Isocratic Pump for reproducible flow rates with an absence of pump pulsation.
Model 7510 Degasser for elimination of air and other solvent gases.
OmniSEC GPC software for complete system control, data acquisition and processing.

Viscotek TDA max with Tetra Detector Array (TDA) (UV/LS/RI/Vis)
Viscotek TDAmax - Integrated, temperature controlled GPC/SEC system
The Viscotek TDAmax is a complete, temperature controlled, advanced, multidetector GPC/SEC system suitable for all macromolecular applications, particularly research. It consists of three unique and complementary components – The Tetra Detector Array (TDA) (UV/LS/RI/Vis), the GPCmax integrated solvent and sample delivery module and the OmniSEC software
The Viscotek TDAmax is a complete, advanced, multidetector GPC/SEC system suitable for all macromolecular applications.
Calculation modules Conventional, Universal, Light Scattering, Triple, Copolymer, Protein specific, FIPA
Results output Mn, Mw, Mz, Mp, Mw/Mn, IV [η], Rh, Rg, Branching Number, Branching Frequency, Number of Arms, Weight Fraction, Concentration, MH-a, MH-k, dn/dc, dA/dc. A2

Dionex UltiMate 3000 Nano LC System
The UltiMate® 3000 Nano LC systems have been designed to optimize low flow separations and facilitate easy coupling to mass spectrometry to provide the best resolution, sensitivity, and selectivity for nano LC and proteomics applications. Nano HPLC is a technique that generally involves the application of columns with an internal diameter of 75 µm and low flow rates of around 300 nL/min. These configurations are ideal for analysis with limited sample starting amounts, due to the sensitivity enhancement of the smaller column i.d.

HPLC- Dionex UVD 170S

Dionex HPLC-Detektor UVD 170S. Mit Schnittstelle. Messzelle mit 10µl und 9mm Schichtdicke. 200-595 nm.
Gynkotek HPLC pumpe P580A
High precision Pumpe für HPLC Systeme von Gynkotek, Typ P 580 A. Technische Spezifikationen: 220 V, 50 Hz, 70 W. Volumenstrom: 0,001...10 ml/min. Gehäuse (T)x(H)x(B): 40 x 18 x 42 cm.

Agilent RRLC - Rapid Resolution Liquid Chromatography
Eine optimale Kombination aus Geschwindigkeit, Auflösung und Empfindlichkeit - der LC der Agilent Serie 1200 erfüllt Ihre Applikationsanforderungen. Aufgrund der neuen ZORBAX Säulentechnologie und der neuartigen Systementwicklung können Sie Ihre Analysenzeit um das 20-fache senken und eine 60% höhere Auflösung erzielen. Durch direkte Benutzerinterfaces können Sie den Gerätestatus unmittelbar kontrollieren und monitoren. Schnelle und effiziente Datensysteme bieten neue Möglichkeiten für die Datenanalyse. Mit der Agilent Diagnosesoftware wird der „Intelligent Service“ ermöglicht und somit eine höhere Betriebszeit erzielt, unabhängig davon, welches Datensystem im Einsatz ist.

Wasser- Reinigungs- Anlage

MB- Unilab Glovebox
Complete inert gas system, including modular glovebox, external gas purification system, large standard antechamber and PLC control with touch-screen monitor.

Lösungsmittelreinigungsanlage MS-SPS Compact

Micromeritics TriStar 3000
The TriStar 3000 provides high-quality surface area and porosimetry measurements on solid materials by using the technique of gas adsorption. This easy-to-operate, tabletop instrument is designed to analyze up to three samples simultaneously for optimum throughput. Its speed and accuracy make it an ideal instrument for research and quality control applications, as well as for industries that include pharmaceuticals, cosmetics, paints, pigments, food products, and high-tech ceramics.

Spectrum 100
The PerkinElmer Spectrum 100 Series FT-IR spectrometers are the gold standard in IR spectroscopy for materials testing, academia and research applications. The new Spectrum 100S version demonstrates the highest sensitivity in its class enabling much faster measurement of even the most demanding samples such as highly absorbing or poorly reflecting materials. While for the more cost-conscious laboratory , the Spectrum 100R combines ease of use, reliability and performance at a price normally seen among instruments with a fraction of the 100R’s analytical power. Sampling speed and system stability, backed by PerkinElmer's knowledge, experience and responsive service and support, enable laboratories to achieve the highest quality and reproducible results with ease. Nowhere else will you receive the same confidence in an infrared system that you gain with the PerkinElmer Spectrum 100 FT-IR systems.

UV / VIS Spectrometer


Glasofen für Kugelrohrdestillation

Vakuum- Rotationsverdampfer1

Vakuum- Rotationsverdampfer 2

AFM (Atomic Force Microscopy)

Zeiss Microscopy

GC 8000
The 8000 series forms a complete range of high performance instrumentation, designed to meet the needs set by the current and future demands of the world of chromatography, The 8000 series has been developed to take advantage of the most recent developments in instrument construction, and include more integrated electonics, improved injector design and more comprehensive diagnostics. Modular design means your chromatograph's capabilities can be easily expanded at any time in the future. The 8000 series continues the CE Instruments tradition of providing the Analyst with innovative and reliable instrumentation at the highest level of analytical excellence.

GC 8340


Mini- Pilot

Polyclave Druckreaktor

UV- Reaktor 1

UV- Reaktor 2




Vakuum- Trockenschrank bis 250° C

Wärme-/Trockenschrank 1 bis 300°C

Wärme-/Trockenschrank 2 bis 300°C




Schüttler VWR DS-500


Ultraschall- Reinigung 1

Ultraschall- Reinigung 2




Kolbenkompressor mit Kältetrockner

Kühlraum bis ca. 0°C