Page Areas:



Current Submenu:

Additional Information:

Campus Map

Science Park 2

We are located at
Polymer Technology Center
Science Park 2, 1st floor, room 0175

IPPE Facebook Fan Community

Become a Fan of IPPE!

Become an IPPE Fan on Facebook! ...  more of IPPE Facebook Fan Community (Titel)

Downloads


Position Indication:

Content

Zoltan Major

Prof. Dr. Zoltan Major

Prof. Dr. Zoltan Major (Back to Team Overview)
Head of Institute

Science Park 2, 0174
Phone: +43 732 2468 6591
zoltan.major(/\t)jku.at

Tab Navigation appendant to Information

Publikationen

Publikationstyp: Aufsatz / Paper in SCI-Expanded-Zeitschrift

Moser R., Kettlgruber G., Siket C., Drack M., Graz I., Cakmak U., Major Z., Kaltenbrunner M., Bauer S.
From Playroom to Lab: Tough Stretchable Electronics Analyzed with a Tabletop Tensile Tester Made from Toy-Bricks, in: Advanced Science, Page(s) 1500396, 2016.
Schausberger S., Kaltseis R., Drack M., Cakmak U., Major Z., Bauer S.
Cost-Efficient Open Source Desktop Size Radial Stretching System With Force Sensor, in: IEEE Access, Volume 3, Page(s) 556-561, 2015.
Machado M., Fischlschweiger M., Major Z.
Strength of single-lap-joint assemblies of continuous unidirectional carbon fibre reinforced thermoplastic matrix tapes under tensile loading, in: Journal of Composite Materials, 2014.
Major Z., Pinter G.
Investigation of the dynamic mechanical behavior of polyetheretherketone in the high stress tensile regime, in: Mech Time-Depend Mater, Page(s) 663-684, 2013.
White M., Kaltenbrunner M., Glowacki E., Gutnichenko K., Kettlgruber G., Graz I., Aazou S., Ulbricht C., Egbe D., Miron M., Major Z., Scharber M., Sekitani T., Someya T., Bauer S., Sariciftci S.
Ultrathin, highly flexible and stretchable PLEDs, in: nature photonics, Number 7, Page(s) 811, 2013.
Cakmak U., Major Z.
"Nanoindentation of polymers" meccanica 2011, in: Meccanica, Page(s) 707-718, 2012.
Major Z., Lang R.
Characterization of the fracture behaviour of NBR and FKM grade elastomers for oilfield applications, in: Engineering Failure Analysis, Volume 17, Page(s) 701-711, 2010.
Stifter D., Leiss-Holzinger E., Major Z., Baumann B., Pircher M., Götzinger E., Hitzenberger C., Heise B.
Dynamic optical studies in materials testing with spectral-domain polarization-sensitive optical coherence tomography, in: Opt. Express, Volume 18, Page(s) 25712-25725, 2010.
Jerabek M., Major Z., Renner K., Moczo J., Pukanszky B., Lang R.
Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension, in: Polymer, Volume 51, Number 9, Page(s) 2040-2048, 2010.
Tscharnuter D., Jerabek M., Major Z., Lang R.
On the Determination of the Relaxation Modules of PP Compounds from Arbitrary Strain Histories, in: Mechanics of Time-Dependent Materials, Page(s) 1-14, 2010.
Jerabek M., Tscharnuter D., Major Z., Ravi-Chandar K., Lang R.
Relaxation behavior of neat and particulate filled polypropylene in uniaxial and multiaxial compression, in: Mechanics of Time-Dependent Materials, Volume 14, Number 1, Page(s) 47-68, 2010.
Jerabek M., Major Z., Lang R.
Strain determination of polymeric materials using digital image correlation, in: Polymer Testing, Volume 29, Page(s) 407-416, 2010.
Tscharnuter D., Jerabek M., Major Z., Lang R.
Time-Dependent Poisson's Ratio of Polypropylene Compounds for Various Strain Histories, in: Mechanics of Time-dependent Materials, Page(s) 15-28, 2010.
Jerabek M., Major Z., Lang R.
Uniaxial compression testing of polymeric materials, in: Polymer Testing, Volume 29, Page(s) 302-309, 2010.
Gódor I., Major Z., Vezér S., Grün F.
Experimental Definition of a Failure Model for the Tribological Behaviour of PTFE Bronze Compounds, in: Proc. IMechE, Journal of Engineering Tribology, Volume 223 Part J, Page(s) 807-815, 2009.

Publikationstyp: Aufsatz / Paper in SSCI-Zeitschrift

Major Z., Pinter G.
PCB drop test lifetime assessment based on simulations and cyclic bend tests, in: Microelectronics Reliability, Volume 53, Page(s) 774–781, 2015.
Major Z., Pinter G.
Cyclic loading of polyetheretherketone at high tensile stress levels, in: Key Engineering Materials, Page(s) 12-16, 2014.
Cakmak U., Kallai I., Major Z.
Temperature dependent bulge test for elastomers, in: Mechanics Research Communications, 2014.
Major Z., Pinter G.
Elevated pitting wear of injection molded polyetheretherketone, in: (PEEK) rolls, Page(s) 1052-1063, 2013.
Major Z.
Mech of Time Dependent materials, in: Mech of Time Dependent materials, 2013.
Major Z., Adachi T.
Non-Stoichiometric Curing Effect on Dynamic Mechanical Properties of Bisphenol A-Type Epoxy Resins, in: Journal of the Japanese Society for Experimental Mechanics, Volume 13, Page(s) 148-153, 2013.
Berer M., Major Z.
Characterisation of the local deformation behaviour of engineering plastics rolls, in: Strain, Volume 48, Number 3, Page(s) 225-234, 2012.
Major Z., Hiptmair F.
Combination of Novel Virtual and Real Prototyping Methods in a Rapid Product Development Methodology, in: Journal Polimeri, Page(s) 119-123, 2011.

Publikationstyp: Aufsatz / Paper in sonstiger referierter Fachzeitschrift

Ritt R., Machado M., Fischlschweiger M., Major Z., Antretter T.
An inverse finite element approach to calculate full-field forming strains, in: Key Engineering Materials, Volume 651-653, Page(s) 363--368, 2015.
Major Z., Miron M., Cakmak U.
Characterization of Thermoplastic Elastomers for Design Efforts, in: Advanced Materials Research, Volume 905, 2014.
Rettenwander T., Fischlschweiger M., Machado M., Steinbichler G., Major Z.
Tailored patch placement on a base load carrying laminate, in: Composite Structures, Page(s) 48-54, 2014.
Cakmak U., Hiptmair F., Major Z.
Applicability of elastomeric time dependent behavior in dynamical mechanical damping systems, in: Mechanics of Time-dependent Materials, Page(s) 139-151, 2013.
Major Z., Miron M., Adachi T.
Numerical Modeling of Damage and Failure in a Honeycomb Sandwich Material Loaded under Low Energy, Low Velocity Impact, in: Abstracts Book of 8th International Symposium on Impact Engineering, Page(s) 93, 2013.
Schrittesser B., Major Z., Filipcsei G.
Characterization of the dynamic mechanical behavior of (Polydimethylsiloxane based) magneto - elastomers, in: Journal of Physics: Conference Series 149, 2009.

Publikationstyp: Aufsatz / Paper in nicht-referierter Fachzeitschrift

Major Z., Machado M., Frontini P., Torres J.
Deformation and failure of semicrystalline polymers under dynamic tensile and biaxial impact loading, in: International Journal of Impact Engineering, Volume 91 - 98 (2016), Page(s) 1, 2016.
Major Z., Adachi T.
Non-stoichiometric curing effect on fracture toughness of nanosilica particulate-reinforced epoxy composites, in: Journal of Materials Science, Volume 49, Number 21, Page(s) 7454-7461, 2014.
Cakmak U., Major Z.
Experimental Thermomechanical Analysis of Elastomers Under Uni-and Biaxial Tensile Stress State, in: Experimental Mechanics, 2013.
Major Z., Lang R.
Application of Displacement Controlled Fatigue Tests to Elastomers, in: FATIGUE SYMPOSIUM LEOBEN, 2012.
Cakmak U., Grestenberger G., Major Z.
"A novel test method for quantifying surface tack of polypropylene compound surfaces", in: eXPRESS Polymer Letters, Page(s) 1009-1016, 2011.
Stricker M., Steinbichler G., Major Z., Reiter M.
Bauteilgeometrie im schnellen Zugriff, in: Kunststoffe, Volume 100, Number 4, 2010.
Major Z., Lang R.
Characterization of the Deformation and Fracture Behavior of Polymers in Monotonic Torsion and Combined Tension/Torsion Experiments, in: Conference Proceeding, Number ID 94, 2010.

Publikationstyp: Aufsatz / Paper in Tagungsband (referiert)

Ernst W., Nussbaum G., Berger V., Major Z.
Mouthsticks - A Participatory Approach, in: Peter Cudd / Luc de Witte (Eds.) (Eds.): Harnessing the Power of Technology to Improve Lives, Series Studies in Health Technology and Informatics, Volume 242, Page(s) 413-420, IOS Press, 2017.
Reiter M., Miron M., Major Z.
Design and Simulation of a Polymeric 3D Printed Fall Arrest System for Climbing, in: J.F. Silva Gomes and Shaker A. Meguid (Eds.): Recent Advances in Mechanics and Materials in Design, 2015.
Reiter M., Jerabek M., Major Z.
Micromechanically based Modelling of the Failure Behavior of Short Fiber Reinforced Polypropylene Components under Impact Loading, in: Proceedings - 20th International Conference on Composite Materials, 2015.
Reiter M., Jerabek M., Gastl S., Hartl A., Lang R., Major Z.
Evaluation of the applicability of the first pseudograin failure model for short glass fiber reinforced polypropylene materials, in: Conference Proceedings 19th International Conference on Composite Materials, Montreal, Series Proceedings, 2013.
Cakmak U., Major Z., Leiss-Holzinger E., Heise B., Bouchot J., Leitner M., Klement E., Stifter D.
Evaluation of structural change and local strain distribution in polymers comparatively imaged by FFSA ad OCT techniques, in: eXPRESS Polymer Letters, Series eXPRESS Polymer Letters, Page(s) 249-256, 2011.
Major Z.
A hallbach dipolar arry for rheological measurements of magnetic field dependent materials, in: Annual European Rheology Conference, 2010.
Major Z., Isasi M., Schwarz T.
Characterization of the fracture and fatigue behavior of thermoplastic elastomer materials, in: Key Engineering Materials, Volume 417-418, Page(s) 789-792, 2010.
Berer M., Major Z.
Characterization of the global deformation behaviour of engineering plastics rolls, in: International Journal of Mechanics and Materials in Design, published online, 2010.
Fuchs P., Major Z.
Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads, in: "Frattura ed Integrità Strutturale", Number 15, Page(s) 64-73, 2010.
Fuchs P., Major Z.
Experimental Determination of Cohesive Zone Models for Epoxy Composites, in: Experimental Mechanics, published online, Page(s) 1-8, 2010.
Schrittesser B., Major Z., Olah L., Schwarz T.
Implementation of an In-Situ Constrained Test Set Up for Rapid Gas Decompression Failure Analysis, in: "9th Fall Rubber Colloquium", 2010.
Reiter M., Major Z., Hiptmair F.
Simulaton of the deformation and failure behavior of bronze particle filled PTFE compounds, in: Multiscale Materials Modeling, 2010.

Publikationstyp: Aufsatz / Paper in Tagungsband (nicht-referiert)

Jerabek M., Major Z., Lang R.
Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension, in: Eurofillers 2009, Page(s) 18-22, 2009.

Publikationstyp: Aufsatz / Paper in Sammelwerk (referiert)

Miron M., Major Z., Adachi T.
Fracture behavior of weld lines in injection moulded components loaded under real operating conditions, in: Procedia Materials Science, 2014.
Umboh M., Adachi T., Oishi K., Higuchi M., Major Z.
Mechanical Properties of Nano-Silica Particulate-Reinforced Epoxy Composites, in: Journal of Materials Science, 2012.
Adachi T., Oishi K., Higuchi M., Umboh M., Major Z.
Non-Stoichiometric Curing Effect on Dynamic Mechanical Properties of Bisphenol A-Type Epoxy Resins., in: Journal of the Japanese Society for Experimental Mechanics, 2012.
Major Z., Blaz L.
Morphology, mechanical, cross-linking, thermal, and tribological properties of nitrile and hydrogendated nitrile rubber/multi-walled carbon nanotubes composites prepared by melt compounding, in: Applied surface science, Series 2, Volume 257, Page(s) 565-573, 2010.

Publikationstyp: Handbuch (Folgeauflage)

Major Z., Machado M.
Forming of woven-reinforced thermaplastic-matrix composites: Characterization, modellinger, and validation, 2015.

Publikationstyp: Tagungsband Herausgeberschaft (Erstauflage)

List M., Paulik C., Major Z., Teasdale I., Brüggemann O.
Danube Vltava Sava Polymer Meeting - DVSPM 2015, Trauner Verlag, 2015.
List M., Paulik C., Major Z., Teasdale I., Brüggemann O.
Advances in Polymer Science and Technology 3, Trauner, 2013.

Publikationstyp: Rezension (SCI-Expanded-Zeitschrift)

Major Z., Cakmak U.
High rate fracture toughness testing of thermoplastics, Page(s) 79–87, 2014.
Major Z., Cakmak U.
Mechanical Properties of Nano-Silica Particulate-Reinforced Epoxy Composites Considered in Terms of Crosslinking Effect in Matrix Resins, Page(s) 5148-5156, 2013.

Publikationstyp: Sonstige

Lang R., Major Z., Steinbichler G., Miethlinger J.
Bildungskatalog 2014 Kunststofftechnologie, in: Fachmagazin WANTED, Page(s) 40-45, 2014.
 

Gehaltene Vorträge

Vortragstyp: Hauptvortrag / Eingeladener Vortrag auf einer Tagung

  1. Validation an dimplementation of failure parameters in integrated simulations for short fibre reinforced plypropylene (21.09.2016)
  2. Numerical predictions an dmechanical structures utilising digital image correlation (20.09.2016)
  3. Comparison of VFM and Parallel Network Material Model for material Parameter Determination (10.06.2016)
  4. Characterisation and Testing of Composite Materials and Components for Dyncomp Cyclocopter VTOL Aircraft (09.06.2016)
  5. 3D-Printing of thermoplastic Elastomeres (09.06.2016)
  6. Failure Analysis of Braided Composite Structures in Torisonal Loading (08.06.2016)
  7. Mechanical characterization of sovent-exposed poly(dimethylsiloxane) under dynamic loading (19.05.2016)
  8. Fatigue of Polymeric Composites (05.04.2016)
  9. Eligibility of experimental and numericial fracture mechanics methods for polymeric structures (25.06.2014)
  10. Micro-Mechanics Based Design and Dimensioning of Polymer Composites & Components (15.01.2014)
  11. Micro-Mechanics Based Design and Dimensioning of Polymer Composites & Components (14.10.2013)
  12. Effect of Non-Stoichiometric Curing on Dynamic Compression Properties of Epoxy Composites Filled with Nano-Silica Particles (06.09.2013)
  13. Design of Heterogeneous Materials for Engineering Applications – from Composites to Designed “Meta”-Materials (22.08.2013)
  14. Numerical Modeling of Damage and Failure in a Honeycomb Sandwich Material Loaded under Low Energy, Low Velocity Impact (28.05.2013)
  15. Processing and Characterization of Magnetoelastomers (23.05.2013)
  16. Material Models for Soft Materials and Determination of Model Parameters (24.01.2013)
  17. Real and Virtual Fracture Tests on Welding Lines of Injection Molded Short Fiber Reinforced Polymers (28.08.2012)
  18. Applicability of various fracture mechanics models for finite element modeling of injection molded polymeric components (05.07.2012)
  19. Applicability of various fracture mechanics models for injection molded parts in FE (02.07.2012)
  20. Applicability of Displacement Controlled Fatigue Test Methods for Compliant Structures (03.06.2012)
  21. Application of Displacement Controlled Fatigue Tests to Elastomers (18.04.2012)
  22. Bruchverhalten von Elastomerwerkstoffen unter komplexen Belastungen, Fracture Mechanics and Statistical Mechanics of Reinforced Elastomeric Blends (08.03.2012)
  23. Ermüdung von Polymer-Composites - Herausforderungen an die Charakterisierung des Versagensverhaltens und die Kennwertermittlung für die Bauteil-Simulation (01.12.2011)
  24. Comparison of the Loading Rate Dependant Behavior of Various Polymeric Test Specimens (28.09.2011)

Vortragstyp: Vortrag auf einer Tagung (referiert)

  1. Mouthsticks - A Participatory Approach (13.09.2017)
  2. Finite element simulation an dmechanical modelling of nanoparticles reinforced composite (29.11.2016)
  3. Comparison of virtual fields method, parallel network material model and finite element updating for material parameter determination (19.09.2016)
  4. An Inverse Finite Element Approach to Calculate Full-Field Forming Strains (15.04.2015)
  5. Characterization and Modeling of the Rapid Gas Decompression of Elastomers (02.02.2015)
  6. Characterization of the Rate Dependent Fracture Behaviour of Polymers by Single- and Double Actuator Impact Tensile Tests (15.09.2014)
  7. Characterization of the Fracture of Hydrogels (14.09.2014)
  8. Simulation of failure in single-lap-joints assemblies of carbon fibre tapes (23.07.2014)
  9. Numerical and experimental failure behavior of symmetric and asymmetric sandwich materials (28.06.2014)
  10. Phase transforming metals as fillers in soft polymeric matrices, 3rd International Conference on Physics-based material models and experimental observations (02.06.2014)
  11. On the way to tailor the hysteretic material behaviour of silicon rubber by incorpo-rating phase transforming metals (27.05.2014)
  12. Characterization of Thermoplastic Elastomers for Design Efforts (26.04.2014)
  13. Characterization of Thermoplastic Elastomers for Design Efforts, 3rd International Conference on Applied Materials and Electronics Engineering (26.04.2014)
  14. Fallbeispiel anhand eines realen Bauteils - F1 Fire Bottle Keel (23.04.2014)
  15. Estimating Method of Impact Strength and Damage by Drop Weight Test (25.11.2013)
  16. Optimized Filler Particle Alignment and Stress Concentrations in Natural Objects (06.11.2013)
  17. Hungarian Material Science Conference (15.10.2013)
  18. Hungarian Material Science Conference (13.10.2013)
  19. Applicability of the first pseudo-grain failure model for short glass fiber reinforced polypropylene materials (08.10.2013)
  20. Experimental and numerical analysis of sandwich behaviour under static loading (28.09.2013)
  21. Draping Simulation of woven fabrics for a fire bottle keel (25.09.2013)
  22. Effect of Particle Alignment Induced Anisotropy on the Mechanical Properties of Magnetoelastomers (10.09.2013)
  23. Novel Evaluation Method of Impact Strength and Damage Development (05.09.2013)
  24. Characterization of the Loading Rate Dependent Fracture Behavior over a wide Loading Rate Range using Charpy Specimens (04.09.2013)
  25. Damage and Failure in a Honeycomb Sandwich Material Loaded under Low Energy, Low Velocity Impact (04.09.2013)
  26. Evaluation of the Applicability of the First Pseudo-Grain Failure Model for Short Glass Fiber Reinforced Polypropylene Materials (28.07.2013)
  27. Experimental thermo-mechanical analysis of elastomers during biaxial loading (04.07.2013)
  28. Rheological investigations of PDMS-based magnetolelastomers during curing (04.04.2013)
  29. Effect of Particle Surface Functionalities on the Mechanical Properties of Magnetoelastomers (03.04.2013)
  30. Competition of Polymeric Materials for Light Weight Design and Manufacturing – or Complementary Options (27.02.2013)
  31. Design principles for seals and sealing systems exposed to gas decompression and high temperature gradients (30.01.2013)
  32. Non-Stoichiometric Curing on Fracture Toughness of Nano-Silica Particulate-Reinforced Epoxy Composites. (27.11.2012)
  33. Effect of Non-Stoichiometric Curing on Dynamic Compressive Properties of Nano-Silica Particulate-Reinforced (08.11.2012)
  34. Effect of Non-Stoichiometric Curing on Dynamic Compressive Properties of Nano-Silica Particulate-Reinforced Epoxy Composites. (05.11.2012)
  35. Effect of Non-Stoichiometric Curing on Bending Properties of Nano-Silica Particulate-Reinforced Composites. (25.09.2012)
  36. Applicability of elastomeric time dependent behavior in dynamical mechanical damping systems (24.09.2012)
  37. Novel Evaluation Method of Impact Strength and Damage Development. (06.09.2012)
  38. Effect of Non-Stoichiometric Curing on Dynamic Compression Properties of Epoxy Composites (05.09.2012)
  39. Temperature dependent fracture behavior of rubbers used in the oil and gas industry (27.08.2012)
  40. Rheological properties of PDMS-based magnetoelastomers during curing (10.08.2012)
  41. Spectral Domain Polarization Sensitive Optical Coherence Tomography at 1.55 μm: Novel Developments and Applications for Dynamic Studies in Materials Science (22.01.2011)
  42. "Determination of the local Stress-Strain Responses during Tensile Testing of Polymers using Digital Image Correlation and Optical Coherence Tomography" (28.09.2010)
  43. "Development of a Stickiness Test Methodology" (22.09.2010)
  44. "Mechanics of Peel-Test: Soft Materials" Advanced Problems in Mechanics (16.09.2010)
  45. Analysis, comparison and interpretation of instrumented Charpy and puncture impact test results of brittle to ductile transition behaviour of PP-compounds (05.07.2010)
  46. Multiaxial yield behaviour of polypropylene (31.01.2010)
  47. Nanoindentation of Polymers (24.09.2008)

Vortragstyp: Vortrag auf einer Tagung (nicht referiert)

  1. Full-field strain analysis of polymeric materials- Uniaxial and biaxial tensile testing methodologies (26.10.2010)
  2. comparison of the deformation behavior of digital materials using full-field strain analysis and micromechanical modeling (11.10.2010)
  3. development of a stickiness test methodology (24.09.2010)
  4. determination of tensile properties of polymers at high strain rates (05.07.2010)
  5. full-field strain analysis of a ski boot (05.07.2010)
  6. strain analysis of the De Mattia test (05.07.2010)
  7. advanced problems in mechanics (04.06.2010)
  8. Determination of Material Laws for Micromechanical Simulation of Heterogenuos Polymeric Composites (20.05.2010)
  9. Strain recovery and nonlinear viscoelastic viscoplastic modeling of polypropylene (31.01.2010)
  10. Bruchmechanik von Leiterplatten (06.11.2009)
  11. On the extension of the covered time-range of linear viscoelastic material functions in standard tests (20.09.2009)
  12. Development of surface dynamic mechanical analysis for TPU materials (11.09.2009)
  13. Characterization of the Deformation Behavior of Printed Circuit Boars under Dynamic Loading Conditions (06.09.2009)
  14. Characterization of the Deformation Behaviour of Engineering Plastics Rolls — Part I: Investigation of the Global Stress — Strain Behaviour (18.07.2009)
  15. Characterization of the Failure Behavior of Printed Circuit Boars under Dynamic Loading Conditions (15.07.2009)
  16. Particulate filled polypropylene composites - micromechanical deformations and interfacial failure (05.07.2009)
  17. Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension (20.06.2009)
  18. Determination of Material Laws for Micromechanical Simulation of Heterogenuos Polymeric Composites (15.05.2009)

Vortragstyp: Eingeladener Vortrag an anderen Institutionen

  1. Produktentwicklung mit faserverstärkten Thermoplasten (01.12.2012)
  2. A Combined Experimental Numerical Characterization of the Damage Behavior for Discontinuous Fiber Reinforced Polymers Considering Various Model Scales (15.10.2012)
  3. Applicability of elastomeric time dependent behavior in dynamical mechanical damping systems (24.09.2012)
  4. Eine kombinierte experimentelle und numerische Methodik für die Modellierung des mechanischen Deformations- und Schädigungsverhaltens von heterogenen Polymerwerkstoffen mittels Rapid-Prototyping-Mikrozellen (30.12.2011)
  5. Measurement and Test Technique Considerations for High Rate Material and Component Testing – Part a: Charpy Test (28.09.2011)
  6. gVarious Elastomer Tests using BOSE ElectroForce Test Systems (05.04.2011)

Vortragstyp: Posterpräsentation

  1. Characterization of the Fatigue Behaviour of Hydrogels (29.06.2014)
  2. Characterization of the Fatigue Behaviour of TPU’S (29.06.2014)
  3. Experimental Determination of Material Data for Temperature Dependent Component Simulation (29.06.2014)
  4. Fracture behavior of weld lines in injection moulded components loaded under real operating conditions (29.06.2014)
  5. Modeling of Single-Lap-Joint Assemblies of Carbon Fiber Tapes (10.10.2013)
  6. Experimental Approach for Characterizing the Shear Failure Behaviour of Short Glass Fiber Reinforced Polypropylene and Micromechanical Numerical Implementation (25.09.2013)
  7. Mechanical behavior of composite sandwich materials loaded under four point bending (10.09.2013)
  8. Development of a Magnetoelastomeric Demonstrator (09.09.2013)
  9. Numerical Design And Mechanical Performance Of Injected Molded Carbon Fiber/Peek Gears (09.09.2013)
  10. Application of Ultrasonic Welding for Form-fit Hybrid Joints of Steel and PA6.6-GF (23.04.2013)
  11. Characterization and Simulation of Fabrics (23.04.2013)
  12. Testing of unreinforced and reinforced polymer gears (22.04.2013)
  13. Preparation and rheological characterization of PDMS-based magnetoelastomers (03.04.2013)
  14. Investigation of PDMS-based magnetoelastomers via Rheometry (13.03.2013)
  15. Characterization of PDMS-based magnetoelastomers via Rheometry (07.08.2012)
  16. Micromechanical simulation of the failure behavior of short fiber reinforced PP composites (25.06.2012)
  17. Rapid Gas Decompression Behavior of H-NBR based Elastomers (16.11.2010)
  18. Rapid Gas Decompression Behavior of H-NBR based Elastomers (29.09.2010)
  19. Bulk and surface charcteritzation of TPU-materials for sealing application (15.09.2010)
  20. Method Development for the Reliability Testing of Printed Circuit Boards under Dynamic Loads (21.07.2010)
  21. Development of surface dynamic mechanical analysis for TPU materials (20.09.2009)
  22. Crack Simulation with an experimentally determined cohesive zone model (15.09.2009)
  23. Modelling of the Filled Elastomer Moduli of Unfunctionalized, Hydroxy-, and Carboxy- Functionalized Multi-walled Carbon Nanotubes Reinforced Hydrogenated Nitrile Rubber and the Morphology of Nanocomposites (10.07.2009)
  24. "The Influence of Nitrile Content, Hydrogenation and Compound (05.07.2009)
  25. Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading (05.06.2009)
  26. Modelling of the Filled Elastomer Moduli of Unfunctionalized, Hydroxy-, and Carboxy- Functionalized Multi-walled Carbon Nanotubes Reinforced Hydrogenated Nitrile Rubber and the Morphology of Nanocomposites (25.05.2009)
  27. Development of a Novel Multipurpose Creep and Relaxation Test System (13.05.2009)
  28. The Influence of Nitrile Content, Hydrogenation and Compound preparation on Morphological, Mechanical, Thermal and Other Properties of (Hydrogenated) Nitrile Rubber/Carbon Nanotube Nanocomposites (12.05.2009)
  29. Characterization of the Biaxial Deformation Behaviour of Elastomers (10.05.2009)
  30. Cutting Experiments on Thermoplastic Polymers (09.05.2009)
  31. Test System Development for Characterizing of Timing Belts (09.05.2009)
  32. Characterization of the cyclic deformation and fatigue failure behaviour of printed circuit boards (05.05.2009)

Vortragstyp: Andere Vorträge und Präsentationen

  1. JKU Kunststofftechnik Studium (25.06.2015)
  2. JKU Kunststofftechnik Studium (08.10.2013)
  3. simulation of the deformation behavior of digital materials by Digimat MF and FE (05.10.2010)
  4. Development of a stickiness test methodology (22.09.2010)
  5. Modeling and Simulation of the Deformation Behavior of Particle Filled PP compounds (02.10.2009)
 

Forschungsprojekte:

  1. AUDI AG 2017 Composite (Anfangsjahr: 2017)
  2. QuatroK (Anfangsjahr: 2017)
  3. 0-Waste (Anfangsjahr: 2017)
  4. Borealis 2016 (Anfangsjahr: 2016)
  5. Doppelmayr Seilbahnen (Anfangsjahr: 2016)
  6. Pez International AG (Anfangsjahr: 2016)
  7. Polymere GENerative FERtigung in Operational SupplyChains 4.0 (Anfangsjahr: 2016)
  8. DIMAP - Novel nanoparticle enhanced Digital Materials for 3D Printing and their application shown for the robotic and electronic industry (Anfangsjahr: 2015)
  9. ECS Entwicklung motornahe Kunststoffbauteile (Anfangsjahr: 2015)
  10. Entwicklung von Schalungssystemen aus Kunst und/oder Faserverbundwerkstoffen (Anfangsjahr: 2015)
  11. Mechanische Charakterisierung von Composite Materialien (Anfangsjahr: 2015)
  12. Raproergo (Anfangsjahr: 2015)
  13. STOMMMAC - STOchastic Multi-scale Modeling Methodologies for the Assessment of failure performance of Composite materials (Anfangsjahr: 2015)
  14. Development of Novel Plastic Gears for Various Automotive Applications (Anfangsjahr: 2014)
  15. High temperature resistant elastomers for high pressure application (Anfangsjahr: 2013)
  16. Kunststofftechnik Borealis II (Anfangsjahr: 2013)
  17. Prototypentwicklung eines Klemmkammes und Untersuchung der Chemikalienbeständigkeit eines ausgewählten Werkstoffes (Anfangsjahr: 2013)
  18. Entwicklung einer neuartigen Tourenschibindung für Snowblades (Anfangsjahr: 2012)
  19. Entwicklung und Prototypenherstellung von Verschlusskappen (Anfangsjahr: 2012)
  20. Expertenberatung Drapiersimulation mit FiberSIM (Anfangsjahr: 2012)
  21. Kunststofftechnik Borealis II (Anfangsjahr: 2012)
  22. Kunststofftechnik Borealis II (Anfangsjahr: 2011)
  23. Methodenentwicklung für die Fertigung endlosfaserverstärkter thermoplastischer Bauteile für Anwendungen im Nutzfahrzeugbau (Anfangsjahr: 2011)
  24. APMT - Advanced Polymeric Materials and Process Technologies (Anfangsjahr: 2010)
  25. Kunststofftechnik Borealis II (Anfangsjahr: 2010)