Bachelor Theses

Device Engineering to Remove PVA Support Structures for 3D printed Parts

Embedded Impedance Analyzer Based On System-On-Chip

Device to measure the ultraviolet radiation, the radon exposure and the atmospheric pressure

Room climate station

Sensordevelopment and measurement of railway cracks
 

Fadil Omeragic

February 2018

Design of a measurement system with capacitive proximity sensors for the determination of the position of objects

Peter Philipp Hanns

August 2017

Measurement system for gesture recognition

Tobias Kronlachner

August 2017

Development of a reference measuring system for position detection of fingertips

Daniel Ott

March 2017

Experimental set-up for analysis of electrowetting

Interface for inkjet printheads to verify functional inks

Preliminary characterization of inkjet-printed thermocouples

Development of a Controller for DC-Servo Linear Stages

Control system for illuminance and correlated color temperature of an integrating sphere

Stephan Hromecek

Construction of a measuring system with capacitive proximity sensors

Development of a mobile acceleration sensing device with a datalogger for comfort evaluation in coaches

August 2015

Development of a measurement setup for microphone calibration by the reciprocity technique

August 2015

Capacitive position measurement using a rubber mat

August 2015

Flashlight sintering of inkjet printed electronics

August 2015

Underwater Voice Transmission via Piezoelectric Bone Conduction Transducer and Light

August 2015

Adaptive measurement system based on LinuxCNC and COMEDI

September 2014

Analysis of surface change of electrically stressed conduction paths

Lisa Sonnleithner

Conceptualization of a 3-DOF force sensor

Low Distortion Signal Transmission - Influence of Coupling Mechanisms

Characterisation of a 24-bit capacitance-to-digital converter (AD7746)

Using optical mice as low-cost-sensors

Detection of user-related action along the lines of the compound eyes for the control of urinals

Laser-pointer Based Intent Recognition for Controlling Computer-Aided Presentations

Measurement of the electrolytic conductivity

August 2011

Development of a universal microcontroller module with USB-interface

Mobile Low-Cost Accelerometer-Module

Characterization of GMR-Sensors

November 2009

Statistical signal processing by means of cyclostationary processes and higher order spectra

October 2009

Texture Recognition at Coils

April 2009

Low Cost Rapid-Control-Prototyping System for MATLAB/Simulink using RTLinux

March 2009

Analysis and disturbance identification for an EMC appropriate construction of a measurement system for high precision measuring diameter-unsteadiness

February 2009

On-line Measurement of Refractive Index Variations in Optical Foils by Means of the Schlierentechnique

September 2008

Image Processing for Optical Quality Control in Technical Processes  

June 2008

Analysis and improvement of a magneto-resistive position measurement circuit  

August 2007

Shape Analysis for Quality Assurance of Steel Coils

June 2007

High Speed Digital Conversion

May 2007

Student Problems: Inductive coupling

Anbindung einer Zeilenkamera an einen PC/104 Embedded-PC (only available in German)

April 2005

Fouriertransformations-Infrarotspektrometer (only available in German)

December 2004

Aufbau eines Laborübungssystems zur Simulation von ADC Wandlern mit Hilfe von Mikrocontrollern (only available in German)

November 2004