Validation of a mechanical recycling process for food contact polyolefins - Sarah Dornetshuber, Christian Paulik, Katarina Rot

Demonstration of a biological sensor to determine hydrogen mass transfer in biological methanation using methanogenic Archaea - Marco Orthofer, Walter Hofmann, Christian Paulik, Simon K.-M. R. Rittmann

Optimization of enzyme-catalyzed polyester synthesis - Lena Graf, Klara Saller, Clemens Schwarzinger

Analysis of sulfonated polyesters via pyrolysis-GC/MS and TGA Methods - Klara Saller, Clemens Schwarzinger

Reactivity Study of Multi-Functional Monomers for the Development of Water-Dispersible Polyesters - Klara Saller, Theresa Jungwirth, Clemens Schwarzinger

Investigation of three-component Polyesters using MALDI/ToF-Mass Spectrometry - Klara Saller, Clemens Schwarzinger

Synthesis and characterization of acrylamide-based polyelectrolytes bearing long alkyl spacers 14th Polymer Meeting Graz - Austria/Linz, Felix Leibetseder

Reaction control of polycondensations via monomer quantification by HPLC-MS and ¹H-NMR Spectroscopy 14th Polymer Meeting Graz - Austria/Linz, Gernot Hubner

Ionic liquids and magnesium-aliminum-alkyls as activator for Ziegler-Natta catalysts 14th Polymer Meeting Graz - Austria/Linz, Dario Pindric

Influence of Slurry Polymerization Conditions on the Polyethylene Molecular Weight Distribution
Advances in Polyolefins 2019 - Rohnert Park/California, Gerold Rittenschober

Structure Elucidation of Linear Polyesters via MALDI/ToF-Mass Spectrometry
Austrian Chemistry Days 2019 - Linz/Austria, Klara Saller

Poison Study of Polylactic Acid Polymerisation form Biogenous Feedstock
Austrian Chemistry Days 2019 - Linz/Austria, Regina Itzinger

Determination of hydrolysis and condensation in sol-gel reactions
Austrian Chemistry Days 2019 - Linz/Austria, Thomas Kisling

Ziegler-Natta PP Catalyst Calorimetry
Austrian Chemistry Days 2019 - Linz/Austria, Daniel Pernusch

Improvement of comonomer incorporation due to temperature variation in the heat treatment of Ziegler Natta catalysts
Blue Sky Conference 2019 - Sorrento/Italy, Lukas Göpperl

Progress measurement in sol-gel reactions
PRE 2019 - Hamburg/Germanys, Thomas Kisling

Polypropylene designed for 3D-printing
PRE 2019 - Hamburg/Germanys, Gunnar Spiegel

Comparison of Conventional Analytical and Mass Spectrometric Methods Applied on Polyesters
ISPAC 2019 - Sendai/Japan, Klara Saller

Quantification of polyhydroxybutyrate (PHB) in biomass
BiPoCo 2018, Balatonfüred/Hungary, Raphaela Süß

Influence of nanofibrillated cullulose on the mechanical and thermal properties of polylactic acid
BiPoCo 2018, Balatonfüred/Hungary, Matea Peric

Screening of methanogens in a Simultaneous Bioreactor System (SBRS) with mutiple determination under high pressure conditions
MBoA 2018 - Vienna/Austria, Sara Zwirtmayr

Polymerization kinetics of Ziegler-Natta PP catalysts
WPPRE 2018 - Prag/Czech Republic, Daniel Pernusch

Synthesis of chemical blowing agents for the development of light weight acrylate-based 3D printing inks,
WPPRE 2018 - Prag/Czech Republic, Lukas Göpperl 

Synthesis of thermally expandable acrylic based materials with confined impinging Jet Reactors,
WCCE 2017 - Barcelona/Spain, Andreas Kreuzer

Experimental methods for investigations of biomethanation processes at elevated operaing pressures,
WCCE 2017 - Barcelona/Spain, Patricia Pappenreiter

Spectroscopic studies on demantoid garnets. Is it possible to assign origins based on scientific evidence?,
Austrian Chemistry Days 2017 - Salzburg/Austria, Clemens Schwarzinger/Bettina Schwarzinger/Manuela List

Development of a simultaneous bioreactor system (SBRS) for high throughput screening and characterization of methanogens at high pressure,
Austrian Chemistry Days 2017 - Salzburg/Austria, Sara Zwirtmayr

BioRest: Production of Bio-Polymers from biogenous feedstock and remnant,
Austrian Chemistry Days 2017 - Salzburg/Austria, Regina Itzinger

Hydrophobization of viscose fibers with polyacrylates and polysiloxanes,
Austrian Chemistry Days 2017 - Salzburg/Austria, Gottfried Aufischer

Polymerization of styrene and N-vinylimidazole,
Austrian Chemistry Days 2017 - Salzburg/Austria, Klara Saller

Polyolefin material properties, designed for 3D printing applications,
WPPRE 2017 - Vienna/Austria, Gunnar Spiegel

Synthesis and application of thermally expandable core-shell microspheres,
DVSPM 2017 - Vienna/Austria, Andreas Kreuzer

Investigation of multistage propene polymerizations using a single reactor setup,
DVSPM 2017 - Vienna/Austria, Theresia Hackl

Influence on vinylation of triazine compounds with different functional groups,
BDSHC 2017 - Linz/Austria, Manuela List/Clemens Schwarzinger

Suspension polymerization of thermally expandable microshperes,
EPF 2017 - Lyon/France, Andreas Kreuzer

Development of novel inks for 3D-PolyJet printing,
ISPAC 2017 - Linz/Austria, Andreas Kreuzer

Investigation of turquoise imitations and treatments with FTIR and Pyrolysis-GC-MS,
Mediterranean Gemmological and Jewellery Conference 2017 - Syracuse/Italy, Bettina Schwarzinger/Clemens Schwarzinger